How Armatherm 500 Was Used in Aldi’s Distribution Centre
Armadillo was appointed by engineering firm, Craddy Pitchers Davidson to insulate the distribution centre’s 1000 sqm cold store room, used to stock thousands of frozen and chilled products before distribution to UK Aldi stores.
Why Thermal Breaks Were Needed Under Steel Column Bases
The manufacturer’s product, Armatherm™ 500, was installed directly under steel column bases which bridge the floor slab insulation. Support columns pass through the non-load bearing slab insulation to warm ground beneath, short circuiting the insulation barrier. Armatherm™ 500 is an inert, ultra-high density closed-cell polymer which offers high load capacity coupled with outstanding thermal performance.
Aldi Expands Use of Armatherm 500 Across More Projects
Since the installation, Aldi has appointed Armadillo to provide thermal breaks for three more distribution centres across the UK as a result.
Why Armatherm 500 Outperforms Timber in Thermal Breaks
Commenting on the project, Armadillo’s managing director, Jonathan Shaw said: “As this job called for a material with high-compressive strength and fantastic insulation properties, Armatherm™ 500 was the perfect solution for Aldi.
“Hardwoods such as Iroko timber are often specified for thermal breaks, but they absorb moisture and are prone to rot, making them ineffective. Due to its closed cell nature, our product will not absorb moisture and carries all the properties needed to bear column loads and isolate temperatures, which is exactly what the client needed. A material with all of these qualities is highly sought after in today’s market and many competitor products are over specified for these kind of applications so can not fulfil this demand economically.”
Where Else Armatherm 500 Is Being Used
Armatherm™ 500 has been used in a variety of construction projects, from structural steel framing connections and façades to residential builds and freezer rooms.
Other Articles
& Projects
The Cove: ArmaGirt Thermal Breaks Support Pursuit of LEED Points
Thermal Break Solutions in Brick Shelf Angle Support Systems
Thermal Breaking in Cladding and Modern Construction: Key to Energy Efficiency and Cost Savings
Sustainable Living Innovations – 303 Battery, Seattle WA
Insulation Solution for ALDI’s £25M Facility
University of Illinois- Townsend Hall
Armatherm thermal breaks supplied for the expansion project of Hampden Academy in Northern Maine-Case Study
Armatherm Structural Thermal Breaks used to create sustainable, luxury apartments in New York
Enhancing Energy Efficiency: Framingham State University’s Sustainable Ballroom Expansion with Armatherm
