UK
USA
Canada
Australia
New Zealand
Germany
UAE
Ireland
Sweden
Denmark
Norway
Architects, Specifiers & Structural Engineers Hub
Thermal Break Materials
Armatherm is one of the leading suppliers of thermal break materials for the construction industry. Our goal is to provide architects, engineers, and contractors with the knowledge and materials to effectively address thermal bridging.
Thermal bridging has been recognized as a significant factor in building envelope energy loss. Armatherm thermal break materials have low thermal conductivity, high strength, and have been designed and tested to carry the loads, and prevent thermal bridging.
Key Design Features
- Structural integrity
- Thermal Performance
- Fire Properties
Key Design Features
- Structural integrity
- Thermal Performance
- Fire Properties
Product Benefits
Armatherm FRR
- 150 times less conductive than steel
- Load Bearing: Max load pressure up to 43,000 PSI
- Typically used in moment connections
- Multiple thicknesses available to help achieve specified insulation values
- Precut and drilled
Armatherm 500
- A range of grades are available to help achieve specified insulation values
- Thermal conductivities ranging between 0.26 BTU to 0.53 BTU* (* other grades available upon request)
- Material can be cut and drilled on site
- Typical locations include Column Bases, Foundation to Wall Transitions, Concrete Balcony Isolators, Roof Penetrations
- Precut and drilled
Armatherm Z-Girt
- Non-metallic Z-Girt
- Can increase the wall assembly efficiency by up to 98%
- NFPA 285 Approved
- Wide range of depths available
- Similar installation method to that of metallic Z-Girts
- Increases contentious insulation (CI) values
MASONRY SHELF
COLUMN BASE
FOUNDATION WALL
BALCONY CANOPY
PARAPET ROOF PENETRATION
CLADDING
Downloads
Case Studies
Technical Questions
© 2022 COPYRIGHT ARMATHERM™ ALL RIGHTS RESERVED
